Filter
Top Products
Chapter 10 Configuration Commands
ZyWALL (ZyNOS) CLI Reference Guide
70
config delete firewall set <set#>
rule <rule#> alert
Deletes whether or not there is notification of a DoS attack
or a violation of the alert settings.
R+B
config delete firewall set <set#>
rule <rule#> custom-icmp
Deletes the desired ICMP custom service. R+B
config delete firewall set <set#>
rule <rule#> custom-ip
Deletes the desired user defined IP Protocol custom
service.
R+B
config delete firewall set <set#>
rule <rule#> destaddr-range
Deletes the IP address range setting in a rule applying to a
packet with a destination IP address which falls within the
specified range.
R+B
config delete firewall set <set#>
rule <rule#> destaddr-single
Deletes the IP address setting for a rule applying to a
packet with the destination IP address.
R+B
config delete firewall set <set#>
rule <rule#> destaddr-subnet
Deletes the IP address and subnet mask settings for a rule
applying to a packet with the destination IP address and
subnet mask.
R+B
config delete firewall set <set#>
rule <rule#> destport-custom
Deletes the desired TCP/UDP custom port name. R+B
config delete firewall set <set#>
rule <rule#> log
Deletes a log for a rule when the packet matches the rule. R+B
config delete firewall set <set#>
rule <rule#> name
Deletes the rule name. R+B
config delete firewall set <set#>
rule <rule#> protocol
Deletes the protocol number for a rule. R+B
config delete firewall set <set#>
rule <rule#> srcaddr-range
Deletes the IP address range for a rule applying to a packet
with a source IP address that falls within a specified range.
R+B
config delete firewall set <set#>
rule <rule#> srcaddr-single
Deletes the IP address setting in a rule applying to a packet
with a specified source IP address.
R+B
config delete firewall set <set#>
rule <rule#> srcaddr-subnet
Deletes the IP address and subnet mask setting in a rule
applying to a packet with a specified source IP address and
subnet mask.
R+B
config delete firewall set <set#>
rule <rule#> tcp destport-any
Deletes the rule applying to a TCP packet with any
destination port.
R+B
config delete firewall set <set#>
rule <rule#> tcp destport-range
Deletes the port setting for a rule applying to a TCP packet
with a destination port falling within the specified range.
R+B
config delete firewall set <set#>
rule <rule#> tcp destport-single
Deletes the port setting for a rule applying to a TCP packet
with the specified destination port.
R+B
config delete firewall set <set#>
rule <rule#> udp destport-any
Deletes the rule applying to a UDP packet with any
destination port.
R+B
config delete firewall set <set#>
rule <rule#> udp destport-range
Deletes the port range setting for a rule applying to a UDP
packet with a destination port falling within the specified
range.
R+B
config delete firewall set <set#>
tcp-idle-timeout
Deletes the timeout for an idle TCP session before it is
terminated.
This command has no effect on firewall settings. To
configure timeout values use tos commands.
R+B
config delete firewall set <set#>
udp-idle-timeout
Deletes the timeout for an idle UDP session before it is
terminated.
This command has no effect on firewall settings. To
configure timeout values use tos commands.
R+B
Table 27 config Command Summary (continued)
COMMAND DESCRIPTION M