Filter
Top Products
IES-1000 User’s Guide
IEEE 802.1Q Tagged VLAN Commands 9-7
Figure 9-6 Example: DVLAN List Command Display
In the figure above, “||” denotes “filter” and “>>” denotes “forward”.
9.5.10 DVLAN Getentry Command
Syntax:
192.168.1.1 vlan1q> dvlan getentry <vid>
where
<vid> =
VLAN ID. Valid parameter range = [1 – 4094].
This command displays an entry with a specified VLAN ID in dynamic GVRP table.
Display a Dynamic VLAN Table Entry Example
The following figure is an example display of the following command.
192.168.1.1 vlan1q> dvlan getentry 2
Figure 9-7 Example: DVLAN Getentry 2 Command Display
In the figure above, “||” denotes “filter” and “>>” denotes “forward”.
9.5.11 VLAN List Command
Syntax:
192.168.1.1 vlan1q> vlan list
This command displays the entire VLAN table. The display refreshes periodically. Press [ENTER] and then enter
the stop command to stop the display from refreshing. The following figure is an example what is displayed when
you use this command.
Figure 9-8 Example: VLAN List Command Display
vid 01 02 03 04 05 06 07 08 09
---- ---- ---- ---- ---- ---- ---- ---- ---- ----
2
||
>>
|| ||
>> >>
|| ||
>>
vid 01 02 03 04 05 06 07 08 09
---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1O O O O
VXXXXXXXX
2OO
XXXXXXXXX
3OOO
XXVXXXXXV
vid 01 02 03 04 05 06 07 08 09
---- ---- ---- ---- ---- ---- ---- ---- ---- ----
2||>>||||>>>>||||>>
3>>>>||||||>>>>>>||
4>>||||>>>>||||>>>>
5||>>||||>>>>||||>>
6>>>>||||||>>>>>>||
7||>>||>>>>||||>>>>
8>>||||>>||>>>>>>>>
9||
>>
|| || ||
>>
||
>> >>