Filter
Top Products
IES-1000 User’s Guide
12-4 Remote Management
♦ overheatOver Trap (defined in ZYXEL-MIB) :
This trap is sent periodically when the network module is no longer overheated.
12.4.2 Trap Add Command
Syntax:
trap add <community> <IP addr> [<port>]
where
<community> =
The password used by the network module to authenticate itself to the trap
server.
<IP addr> =
The IP address of the trap server.
[<Port>] =
The optional port parameter is for specifying the UDP port number on the
server in case it is different from the default of port 162.
This command adds a trap server.
12.4.3 Trap Delete Command
Syntax:
trap delete <community> <IP addr> [<port>]
This command deletes a trap destination. The parameters are the same as the trap add command.
12.4.4 Trap Flush Command
Syntax:
trap flush
This command deletes all trap destinations.
12.4.5 Trap List Command
Syntax:
trap list
This command lists all the trap destinations.