Filter
Top Products
IES-1000 User’s Guide
14-4 Firmware Upload and Recovery
Figure 14-3 Database Edit Dialog
7. Select Normal Bootp to enable normal BOOTP/TFTP functions.
Figure 14-4 Enable BOOTP/TFTP
8. Restart the network module and press any key within three seconds to get the following screen.
Figure 14-5 Enter Debug Mode
9.
Press any key at the “Press any key within 3 seconds to enter debug mode
………………” message, to enter the debug mode.
10.
Enter atnb at the network module boot console.
11. Wait for the firmware upload to finish.
SDRAM Testing ...
Mac address 00:A0:C5:12:34:56
Press any key within 3 seconds to enter debug mode
.............................