Filter
Top Products
IES-1000 User’s Guide
13-2 Configuration Backup/Restore
Do not turn off the network module during the restore process, as it may corrupt the firmware and make
your network module unusable.
Step 1.
Connect to the network module with your favorite FTP client. The command for the SAM1008 is
generally
C:\> ftp <SAM1008 IP address>
at the computer command prompt.
Step 2.
Enter the User name (just press [ENTER]).
User: <ENTER>
Step 3.
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Step 4.
Transfer the configuration files to the network module
ftp> put init
Step 5.
Quit FTP.
ftp> quit
Wait for the update to finish. The network module will restart automatically.