IES-1000 User’s Guide
Configuration Backup/Restore 13-1
Chapter 13
Configuration Backup/Restore
This chapter describes the process for backing up your user settings (configuration) from the network
module onto your computer and how to restore them to the network module.
The network module uses FTP for configuration backup/restore through its built-in FTP server. You can use any
FTP client (for example, ftp.exe in Windows) to backup/restore the network module’s configuration.
13.1 Configuration Files of the Network Module
The network module uses configuration files to store the user’s settings, so they can be applied the next time the
network module is booted. The network module has the following two configuration files:
init = The system configuration file for the network module.
password = The configuration file for the console, Telnet and FTP password.
13.2 Configuration Backup
You can backup all or some configuration files from the network module to your computer. Backup the system
configuration by following the example shown next.
Step 1.
Connect to the network module with your favorite FTP client. The command for the SAM1008 is
generally
C:\> ftp <SAM1008 IP address>
at the computer command prompt.
Step 2.
Enter the User name (just press [ENTER]).
User: <ENTER>
Step 3.
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Step 4.
Get the configuration files from the network module
ftp> get init
Step 5.
Quit FTP.
ftp> quit
13.3 Configuration Restore
You can restore configuration files from your computer to the network module. Restore the system configuration by
following the example shown next.