Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

show port speed

4-10 Port Configuration

show port speed

Usethiscommandtodisplaythedefaultspeedsettingononeormoreports.

Syntax

show port speed [port-string]

Parameters

Defaults

Ifport‐stringisnotspecified,defaultspeedsettingsforallportswilldisplay.

Mode

Switchcommand,read‐only.

Example

Thisexampleshowshowtodisplaythedefaultspeedsettingfor1‐GigabitEthernetport14in

slot 3:

D2(su)->show port speed ge.3.14

default speed is 10 on port ge.3.14.

set port speed

Usethiscommandtosetthedefaultspeedofoneormoreports.Thissettingonlytakeseffecton

portsthathaveauto‐negotiationdisabled.

Syntax

set port speed port-string {10 | 100 | 1000}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

port‐string (Optional)Displaysdefaultspeedsetting(s)forspecificport(s).Fora

detaileddescriptionofpossibleport‐stringvalues,referto“PortString

SyntaxUsedintheCLI”onpage4‐1.

port‐string Specifiestheport(s)forwhichtoaspeedvaluewillbeset.Fora

detaileddescriptionofpossibleport‐stringvalues,referto“Port

StringSyntaxUsedintheCLI”onpage4‐1.

10|100|1000 Specifiestheportspeed.Validvaluesare:10 Mbps,100 Mbps,

or

1000 Mbps.