Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

set vlanauthorization

D-Series CLI Reference 15-43

Parameters

Defaults

Settopolicy.

Mode

Switchcommand,read‐write.

Examples

Thisexampleshowshowtosetthepolicymaptableresponsetotunnel:

D2(rw)-> set policy maptable response tunnel

set vlanauthorization

EnableordisabletheuseoftheRADIUSVLANtunnelattributetoputaportintoaparticular

VLANbasedontheresultofauthentication.

Syntax

set vlanauthorization {enable | disable} [port-string]

Parameters

Defaults

VLANauthenticationisdisabledbydefault.

Mode

Switchcommand,read‐write.

Examples

ThisexampleshowshowtoenableVLANauthenticationforallGigabitEthernetports:

D2(rw)-> set vlanauthorization enable ge.*.*

ThisexampleshowshowtodisableVLANauthenticationforallGigabitEthernetportsonswitch

unit/module 3:

D2(rw)-> set vlanauthorization disable ge.3.*

policy Setsthemaptableresponsetopolicy.Thisisthedefaultsetting,which

allowsauthenticationofupto8multiauthusersperport.

tunnel Setsthemaptableresponsetotunnel,whichallowsauthenticationofup

tomultiauthusersperport. ThissettingisrequiredtoconfigureVLAN

authorizationformultipleusersper

Gigabitport.

enable|disable Enablesordisablesvlanauthorization/tunnelattributes.

port‐string (Optional)SpecifieswhichportstoenableordisabletheuseofVLAN

tunnelattributes/authorization.Foradetaileddescriptionofpossibleport‐

stringvalues,referto“PortStringSyntax UsedintheCLI”onpage 4‐1.