Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

set garp timer

7-24 802.1Q VLAN Configuration

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

Thesettingofthesetimersiscriticalandshouldonlybechangedby personnelfamiliarwiththe

802.1Qstandardsdocumentation,whichisnotsuppliedwiththisdevice.

Examples

ThisexampleshowshowtosettheGARPjointimervalueto100centisecondsforallports:

D2(su)->set garp timer join 100 *.*.*

Thisexampleshowshowtosettheleavetimervalueto300centisecondsforallports:

D2(su)->set garp timer leave 300 *.*.*

Thisexampleshowshowtosettheleavealltimervalueto20000centisecondsforallports:

D2(su)->set garp timer leaveall 20000 *.*.*

leavealltimer‐

value

SetstheGARPleavealltimerincentiseconds(Referto802.1Qstandard.)

port‐string Specifiestheport(s)onwhichtoconfigureGARPtimersettings.Fora

detaileddescriptionofpossibleport‐stringvalues,referto“PortString

SyntaxUsedintheCLI”onpage 4‐1.