Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

set linkflap threshold

4-26 Port Configuration

Parameters

Defaults

Ifport‐stringisnotspecified,actionswillbeclearedonallports.

Mode

Switchmode,read‐write.

Example

Thisexampleshowshowtoclearthelinkflapviolationactiononportge.1.4togeneratinga

Syslogentry.

D2(rw)->clear linkflap action ge.1.4 gensyslogentry

set linkflap threshold

Usethiscommandtosetthelinkflapactiontriggercount.

Syntax

set linkflap threshold port-string threshold-value

Parameters

Defaults

None.

Mode

Switchmode,read‐write.

Example

Thisexampleshowshowtosetthelinkflapthresholdonportge.1.4to5.

D2(rw)->set linkflap threshold ge.1.4 5

port‐string (Optional)Specifiestheport(s)onwhichtoclearthelinkflapaction.

disableInterface Clearsthereactionasdisablingtheinterface.

gensyslogentry Clearsthereactionasgeneratingasyslogentry.

gentrap ClearsthereactionasgeneratinganSNMPtrap.

all Clearsthereactionasalloftheabove.

port‐string Specifiestheport(s)onwhichtosetthelinkflapactiontriggercount.

threshold‐value Specifiesthenumberoflinkdowntransitionsnecessarytotriggerthe

linkflapaction.Aminimumof1mustbeconfigured.