Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

set logging server

D-Series CLI Reference 12-3

set logging server

UsethiscommandtoconfigureaSyslogserver.

Syntax

set logging server index [ ip-addr ip-addr] [facility facility] [severity severity]

[descr descr] [port port] [state {enable | disable}]

Parameters

Defaults

Ifip‐addrisnotspecified,anentryintheSyslogservertablewillbecreatedwiththespecified

indexnumberandamessagewilldisplayindicatingthatnoIPaddresshasbeenassigned.

Ifnotspecified,facility,severityandportwillbesettodefaultsconfiguredwiththesetlogging



defaultcommand(“setloggingdefault”onpage 12‐5).

Ifstateisnotspecified,theserverwillnotbeenabledordisabled.

Mode

Switchcommand,read‐write.

Example

ThiscommandshowshowtoenableaSyslogserverconfigurationforindex1,IPaddress

134.141.89.113,facilitylocal4,severitylevel3onport514:

D2(su)->set logging server 1 ip-addr 134.141.89.113 facility local4 severity 3

port 514 state enable

index Specifiestheservertableindexnumberforthisserver.Validvaluesare1‐

8.

ip‐addrip‐addr (Optional)SpecifiestheSyslogmessageserver’sIPaddress.

facilityfacility (Optional)Specifiestheserver’sfacilityname.Validvaluesare:local0to

local7.

severityseverity (Optional)Specifiestheseveritylevelatwhichtheserverwill

log

messages.Validvaluesandcorrespondinglevelsare:

1—emergencies(systemisunusable)

2—alerts(immediateactionrequired)

3—criticalconditions

4—errorconditions

5—warningconditions

6—notifications(significantconditions)

7—informationalmessages

8—debuggingmessages

descrdescr (Optional)Specifiesatextualstringdescriptionofthisfacility/server.

portport (Optional)SpecifiesthedefaultUDPporttheclientusestosendtothe

server.

stateenable|

disable

(Optional)Enablesordisablesthisfacility/serverconfiguration.