Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

show multiauth idle-timeout

D-Series CLI Reference 15-37

Defaults

Ifnooptionsarespecified,multipleauthenticationsessionentrieswillbedisplayedforall

sessions,authenticationtypes,MACaddresses,andports.

Mode

Switchcommand,read‐only.

Example

Thisexampleshowshowtodisplaymultipleau thenticationsessioninformationforportge.1.1.

D2(su)->show multiauth session port ge.1.1

__________________________________________

Port | ge.1.1 Station address | 00-01-03-86-0A-87

Auth status | success Last attempt | FRI MAY 18 11:16:36 2007

Agent type | dot1x Session applied | true

Server type | radius VLAN-Tunnel-Attr | none

Policy index | 0 Policy name | Administrator

Session timeout | 0 Session duration | 0,00:00:25

Idle timeout | 5 Idle time | 0,00:00:00

Termination time | Not Terminated

show multiauth idle-timeout

Usethiscommandtodisplaythetimeoutvalue,inseconds,foranidlesessionforall

authenticationmethods.

Syntax

show multiauth idle-timeout

Parameters

None.

Defaults

None.

Mode

Switchcommand,read‐only.

Example

Thisexampleshowshowtodisplaytimeoutvaluesfor anidlesessionforallauthenticationtypes.

D2(su)->show multiauth idle-timeout

Authentication type Timeout (sec)

------------------- -------------

dot1x 0

pwa 0

mac 0