Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

clear spantree adminedge

6-38 Spanning Tree Configuration

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

Thedefaultbehavioroftheedgeportadministrativestatusbeginswiththevaluesettofalse

initiallyafterthedeviceispoweredup.IfaSpanningTreeBDPUisnotreceivedontheportwithin

afewseconds,thestatussettingchangestotrue.

Example

Thisexampleshowshowtosetge.1.11asanedgeport:

D2(su)->set spantree adminedge ge.1.11 true

clear spantree adminedge

UsethiscommandtoresetaSpanningTreeporttonon‐edgestatus.

Syntax

clear spantree adminedge port-string

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtoresetge.1.11asanon‐edgeport:

D2(su)->clear spantree adminedge ge.1.11

Configuring Spanning Tree Loop Protect Parameters

Purpose

TodisplayandsetSpanningTreeLoopProtectparameters,includingtheglobalparametersof

LoopProtectthreshold,window,enablingtraps,anddisputedBPDUthreshold,aswellasperport

andport/SIDparameters.See“LoopProtect”onpage 6‐2formoreinformationabouttheLoop

Protectfeature.

port‐string Specifiesport(s)on

whichtoresetedgeportstatus.Foradetailed

descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed

intheCLI”onpage 4‐1.