Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

clear gvrp

D-Series CLI Reference 7-23

Mode

Switchcommand,read‐write.

Examples

ThisexampleshowshowtoenableGVRPgloballyonthedevice:

D2(su)->set gvrp enable

ThisexampleshowshowtodisableGVRPgloballyonthedevice:

D2(su)->set gvrp disable

ThisexampleshowshowtoenableGVRPonge.1.3:

D2(su)->set gvrp enable ge.1.3

clear gvrp

UsethiscommandtoclearGVRPstatusorononeormoreports.

Syntax

clear gvrp [port-string]

Parameters

Defaults

Ifport‐stringisnotspecified,GVRPstatuswillbeclearedforallports.

Mode

Switchcommand,read‐write.

Example

ThisexampleshowshowtoclearGVRPstatusgloballyonthedevice:

D2(su)->clear gvrp

set garp timer

Usethiscommandtoadjustthevaluesofthejoin,leave,andleavealltimers.

Syntax

set garp timer {[join timer-value] [leave timer-value] [leaveall timer-value]}

port-string

Parameters

port‐string (Optional)ClearsGVRPstatusonspecificport(s).Foradetaileddescriptionof

possibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”on

page 4‐1.

jointimer‐value SetstheGARPjointimerincentiseconds(Referto802.1Qstandard.)

leavetimer‐value SetstheGARPleavetimerincentiseconds(Refer to802.1Qstandard.)