Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

clear spantree portpri

D-Series CLI Reference 6-35

clear spantree portpri

UsethiscommandtoresetthebridgepriorityofaSpanningTreeporttoadefaultvalueof128.

Syntax

clear spantree portpri port-string [sid sid]

Parameters

Defaults

Ifsidisnotspecified,portprioritywillbesetforSpanningTree0.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtoresetthepriorityofge.1.3to128onSID1

D2(su)->clear spantree portpri ge.1.3 sid 1

show spantree adminpathcost

UsethiscommandtodisplaytheadminpathcostforaportononeormoreSpanningTrees.

Syntax

show spantree adminpathcost [port port-string] [sid sid]

Parameters

Defaults

Ifport‐stringisnotspecified,adminpathcostforallSpanningTreeportswillbedisplayed.

Ifsidisnotspecified,adminpathcostforSpanningTree0willbedisplayed.

Mode

Switchcommand,read‐only.

port‐string Specifiestheport(s)forwhichtosetSpanningTreeportpriority.Fora

detaileddescriptionofpossibleport‐stringvalues,referto“PortString

SyntaxUsedintheCLI”onpage 4‐1.

sidsid (Optional)ResetstheportpriorityforaspecificSpanningTreeidentifier.

Valid

valuesare0‐4094.Ifnotspecified,SID0willbeassumed.

portport‐string (Optional)Displaystheadminpathcostvalueforspecificport(s).Fora

detaileddescriptionofpossibleport‐stringvalues,referto“PortString

SyntaxUsedintheCLI”onpage 4‐1.

sidsid (Optional)DisplaystheadminpathcostforaspecificSpanningTree

identifier.Validvaluesare

0‐4094.Ifnotspecified,SID0willbeassumed.