Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

Configuring General DHCP Server Parameters

D-Series CLI Reference 14-3

Configuring General DHCP Server Parameters

Purpose

ToconfigureDHCPserverparameters,andtodisplayandclearaddressbindinginformation,

serverstatistics,andconflictinformation.

Commands

set dhcp

UsethiscommandtoenableordisabletheDHCPserverfunctionalityontheD‐Series.

Syntax

set dhcp {enable | disable}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

For information about... Refer to page...

set dhcp 14-3

set dhcp bootp 14-4

set dhcp conflict logging 14-4

show dhcp conflict 14-5

clear dhcp conflict 14-5

set dhcp exclude 14-6

clear dhcp exclude 14-6

set dhcp ping 14-7

clear dhcp ping 14-7

show dhcp binding 14-8

clear dhcp binding 14-8

show dhcp server statistics 14-9

clear dhcp server statistics 14-10

enable|disable EnablesordisablesDHCPserverfunctionality.Bydefault,DHCPserver

isdisabled.