Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

set macauthentication portquietperiod

D-Series CLI Reference 15-25

set macauthentication portquietperiod

Thissetsthenumberofsecondsfollowingafailedauthenticationbeforeanotherattemptmaybe

madeontheport.

Syntax

set macauthentication portquietperiod time port-string

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

Thisexamplesetsport1towait5secondsafterafailedauthenticationattemptbeforeanew

attemptcanbemade:

D2(su)->set macauthentication portquietperiod 5 ge.1.1

clear macauthentication portquietperiod

Thissetsthequietperiodbacktothedefaultvalueof30seconds.

Syntax

clear macauthentication portquietperiod [port-string]

Parameters

Defaults

Ifaport‐stringisnotspecifiedthenallportswillbesettothedefaultportquietperiod.

Mode

Switchcommand,read‐write.

Example

Thisexampleresetsthedefaultquietperiodonport1:

D2(su)->clear macauthentication portquietperiod ge.1.1

time Periodinsecondstowaitafterafailedauthentication.Bydefault,thisis30

seconds.

port‐string Specifiestheportsforwhichthequitperiodistobeapplied.Foradetailed

descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed

intheCLI”onpage 4‐1.

port‐string (Optional)Specifiestheportsforwhichthequietperiodistobereset.Fora

detaileddescriptionofpossibleport‐stringvalues,referto“PortString

SyntaxUsedintheCLI”onpage 4‐1.