Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

clear snmp access

5-18 SNMP Configuration

Ifreadviewisnotspecifiednonewillbeapplied.

Ifwriteviewisnotspecified,nonewillbeapplied.

Ifnotifyviewisnotspecified,nonewillbeapplied.

Ifstoragetypeisnotspecified,entrieswillbestoredaspermanentandwillbeheldthroughdevice

reboot.

Mode

Switchcommand,read‐write.

Example

Thisexamplepermitsthe“powergroup”tomanageallMIBsviaSNMPv3:

D2(su)->set snmp access powergroup security-model usm

clear snmp access

UsethiscommandtocleartheSNMPaccessentryofaspecificgroup,includingitssetSNMP

security‐model,andlevelofsecurity.

Syntax

clear snmp access groupname security-model {v1 | v2c | usm} [noauthentication |

authentication | privacy] [context context]

Parameters

Defaults

Ifsecuritylevelisnotspecified,alllevelswillbecleared.

Ifcontextisnotspecified,nonewillbeapplied.

Mode

Switchcommand,read‐write.

Example

ThisexampleshowshowtoclearSNMPversion3accessforthe“mis‐group”viathe

authenticationprotocol:

D2(su)->clear snmp access mis-group security-model usm authentication

groupname SpecifiesthenameoftheSNMPgroupforwhichtoclearaccess.

security‐modelv1|

v2c|usm

SpecifiesthesecuritymodeltobeclearedfortheSNMPaccessgroup.

noauthentication|

authentication|

privacy

(Optional)ClearsaspecificsecuritylevelfortheSNMPaccessgroup.

contextcontext (Optional)Clearsaspecific

contextfortheSNMPaccessgroup.Enter/‐/

toclearthedefaultcontext.