Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

clear lacp static

D-Series CLI Reference 4-41

clear lacp static

UsethiscommandtoremovespecificportsfromaLinkAggregation Group.

Syntax

clear lacp static lagportstring port-string

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtoremovege.1.6fromtheLAGofaggregatorport6:

D2(su)->clear lacp static lag.0.6 ge.1.6

set lacp singleportlag

UsethiscommandtoenableordisabletheformationofsingleportLAGs.

Syntax

set lacp singleportlag {enable | disable}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

WhensingleportLAGsareenabled,LinkAggregrationGroupscanbeformedwhenonlyone

portisreceivingprotocoltransmissionsfromapartner.Whenthissettingisdisabled,twoormore

portsarerequiredtoformaLAG.

ThissettinghasnoeffectonexistingLAGscreatedwithmultiplememberports.

Italsodoesnot

preventpreviouslyformedLAGsfromcomingupaftertheyhavegonedown,aslongasany

lagportstring SpecifiestheLAGaggregatorportfromwhichportswillberemoved.

port‐string Specifiestheport(s)toremovefromtheLAG.Foradetaileddescriptionof

possibleport‐stringvalues,refer

to“PortStringSyntaxUsedintheCLI”

onpage4‐1.

disable|enable Enablesordisablestheformationof singleportLAGs.