Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

clear logging application

12-8 Logging and Network Management

Defaults

Iflevelisnotspecified,nonewillbeapplied.

Mode

Switchcommand,read‐write.

Example

ThisexampleshowshowtosettheseveritylevelforSNMPto4sothaterrorconditionswillbe

loggedforthatapplication.

D2(rw)->set logging application SNMP level 4

clear logging application

Usethiscommandtoresettheloggingseveritylevelforoneorallapplicationstothedefaultvalue

of6(notificationsofsignificantconditions).

Syntax

clear logging application {mnemonic | all}

levellevel (Optional)Specifiestheseveritylevelatwhichtheserverwilllog

messagesforapplications.Validvaluesandcorrespondinglevelsare:

1—emergencies(systemisunusable)

2—alerts(immediateactionrequired)

3—criticalconditions

4—errorconditions

5—warningconditions

6—notifications(significantconditions)

7—informationalmessages

8—debuggingmessages

Table 12-38 Mnemonic Values for Logging Applications

Mnemonic Application

CLIWEB Command Line Interface and Webview management

SNMP Simple Network Management Protocol

STP Spanning Tree Protocol

Driver Hardware drivers

System Non-application items such as general chassis management

Stacking Stacking management (if applicable)

UPN User Personalized Networking

Router Router