Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

clear snmp targetaddr

D-Series CLI Reference 5-27

Defaults

Ifnotspecified,udpportwillbesetto162.

Ifnotspecified,maskwillbesetto255.255.255.255

Ifnotspecified,timeoutwillbesetto1500.

Ifnotspecified,numberofretrieswillbesetto3.

Iftaglistisnotspecified,nonewillbeset.

Ifnotspecified,storagetype

willbenonvolatile.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtoconfigureatrapnotificationcalled“TrapSink.”Thistrapnotification

willbesenttotheworkstation192.168.190.80(whichistargetaddress“tr”).Itwillusesecurityand

authorizationcriteriacontainedinatargetparametersentrycalled“v2cExampleParams”.For

moreinformationonconfiguringabasicSNMPtrap,

referto“CreatingaBasicSNMPTrap

Configuration”onpage 5‐37:

D2(su)->set snmp targetaddr tr 192.168.190.80 param v2cExampleParams taglist

TrapSink

clear snmp targetaddr

UsethiscommandtodeleteanSNMPtargetaddressentry.

Syntax

clear snmp targetaddr targetAddr

ipaddr SpecifiestheIPaddressofthetarget.

paramparam SpecifiesanentryintheSNMPtargetparameterstable,whichisused

whengeneratingamessagetothetarget.Maximumlengthis32bytes.

udpportudpport (Optional)SpecifieswhichUDPportofthetargethosttouse.

maskmask (Optional)SpecifiestheIPmask

ofthetarget.

timeouttimeout (Optional)Specifiesthemaximumroundtriptimeallowedto

communicatetothistargetaddress.Thisvalueisin.01secondsandthe

defaultis1500(15seconds.)

retriesretries (Optional)Specifiesthenumberofmessageretriesallowedifaresponseis

notreceived.Defaultis3.

taglisttaglist

(Optional)SpecifiesalistofSNMPnotifytagvalues.Thistagsalocation

tothetargetaddressasaplacetosendnotifications.Listmustbeenclosed

inquotesandtagvaluesmust beseparatedbyaspace(forexample,

“tag1tag2”).

volatile|

nonvolatile

(Optional)Specifiestemporary(default),

orpermanentstorageforSNMP

entries.