Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

set igmpsnooping maxresponse

D-Series CLI Reference 11-5

Usage

TheIGMPgroupmembershipintervaltimesetsthefrequencyofhost‐queryframetransmissions

andmustbegreaterthantheIGMPmaximumresponsetimeasdescribedin“setigmpsnooping

maxresponse”onpage 11‐5.

Example

ThisexampleshowshowtosettheIGMPgroupmembershipintervalto250seconds:

D2(su)->set igmpsnooping groupmembershipinterval 250

set igmpsnooping maxresponse

UsethiscommandtoconfiguretheIGMPquerymaximumresponsetimeforthesystem.

Syntax

set igmpsnooping maxresponse time

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Usage

ThisvaluemustbelessthantheIGMPmaximumresponsetimedescribedin“setigmpsnooping

groupmembershipinterval”onpage 11‐4.

Example

ThisexampleshowshowtosettheIGMPmaximumresponsetimeto100seconds:

D2(su)->set igmpsnooping maxresponse 100

set igmpsnooping mcrtrexpiretime

UsethiscommandtoconfiguretheIGMPmulticastrouterexpirationtimeforthesystem.

Syntax

set igmpsnooping mcrtrexpire time

time SpecifiestheIGMPmaximumqueryresponsetime.Validvaluesare100‐

255seconds.Thedefaultvalueis100seconds.

Thisvalueworkstogetherwiththesetigmpsnooping

groupmembershipintervalcommandtoremoveportsfromanIGMPgroup

andmustbelesserthanthegroupmembershipintervalvalue.