Enterasys Networks D2G124-12 Manual

A SERVICE OF

next previous

clear license

2-30 Basic Configuration

Usage

Licensescanbedisplayed,applied,andclearedonlywiththelicense commandsdescribedinthis

chapter.Generalconfigurationcommandssuchasshowconfigorclearconfigdonotaffect

licenses.

Example

Thisexampleshowshowtodisplaylicensekeyinformation.

D2(ro)->show license

key: INCREMENT D2Policy 2006.0728 permanent 31173CAC6495 045100039001

status: Active

clear license

Usethiscommandtoclearthelicensekeysettings..

Syntax

clear license featureId feature

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

ThisexampleshowshowtocleartheD2Policylicensedfeatu re:

D2(rw)->clear license featureId D2Policy

Configuring System Power and Power over Ethernet (PoE)

Purpose

ToreviewandsetsystempowerandPoEparameters,includingthepoweravailabletothesystem,

theusagethresholdforeachmodule,whetherornotSNMPtrapmessageswillbesentwhen

powerstatuschanges,andper‐portPoEsettings.

featureIDfeature Thenameofthefeaturebeingcleared.

Important Notice

Some commands in this section apply only to PoE-equipped D-Series devices. Consult the Installation Guide

shipped with your product to determine if it is PoE-equipped.