xii Introduction
Organization
The manual is organized as follows:
• Chapter 1 illustrates the supported network configurations and shows the network
connectors on the GA-1040.
• Chapter 2 describes GA-1040 configuration from the Touch Panel Display on the
copier.
• Chapter 3 describes GA-1040 configuration from TopAccess.
• Chapter 4 describes GA-1040 configuration from the Command WorkStation.
• Chapter 5 offers guidelines for setting up Windows NT and Novell network servers
for printing to the GA-1040.
• Chapter 6 summarizes some administrative features of GA-1040 software that are
available for IPX/SPX, TCP/IP, and AppleTalk networks, and also offers some
troubleshooting hints.
N
OTE
:
Administrator features described in other manuals are summarized on page 6-1.
About the documentation
This manual is part of the set of GA-1040 documentation that includes the following
manuals for users and system administrators:
• The
Configuration Guide
explains basic configuration and administration of the
GA-1040 for the supported platforms and network environments. It also includes
guidelines for setting up Windows NT 4.0 and NetWare servers to provide PCL and
PostScript printing services to clients.
•
Getting Started
describes how to install software to enable users to print to the
GA-1040. Specifically, it describes installation of printer drivers, printer description
files, and other user software provided on the User Software CD. It also explains how
to connect each user to the network.
• The
Printing Guide
describes the printing features of the GA-1040 for users who
send jobs via remote workstations on the network.
