A SERVICE OF

logo

Open as PDF
next previous
2
2-10 Setting up the GA-1040
Port Setup
You can enable parallel communication simultaneously with Ethernet. To configure
the GA-1040, choose each port type you use and enter the settings for that port.
The options appear in sequence, as described below. Default values, where applicable,
appear in square brackets.
Ethernet Setup
Ethernet Speed
Auto/10 Mbps/100 Mbps [Auto]
Select Auto if your network environment is mixed, or select the speed (10 Mbps or
100 Mbps) of the network to which the GA-1040 is attached.
Parallel Setup
You can connect a single Windows computer to the parallel port and print directly to
the GA-1040.
NOTE: Enabling the parallel port does not conflict with using Ethernet communication
with the GA-1040.