4
4-11 Network Setup
Protocol Setup (AppleTalk)
Enable AppleTalk—Select to enable Apple Talk if you have an AppleTalk network
connected to the GA-1040. This setting enables the GA-1040 to communicate over
AppleTalk networks.
Select Zone—The GA-1040 searches the network for AppleTalk zones in your
network segment. Scroll through the list to select the AppleTalk zone in which you
want the GA-1040 to appear. If your segment has only one zone, the GA-1040 is
assigned to that zone automatically.
If no AppleTalk zone can be found, your network may have no defined zones, or else
the network cable has not been connected. Choose OK.
TO CONFIGURE IPX FRAME TYPES
• Click the Protocol2 tab in the Network Setup window.
The GA-1040 supports these following Ethernet frame types for IPX/SPX:
Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP. You can also allow
the GA-1040 to select the frame type automatically.
