3
3-14 Setting up the GA-1040 from TopAccess
Queue
Publish Print Queue—This option enables users to print (or download) jobs to the
Print queue. Jobs printed to the Print queue are spooled to the GA-1040 disk and
printed on a first-in, first-out basis. Only the connections published in Printer Setup
are available to users.
Publish Direct Connection—This option enables users to print (or download) jobs to
the GA-1040 without spooling. Jobs printed to the Direct connection are not saved in
the Printed queue. If you plan to download fonts to the GA-1040, you must publish
the Direct connection.
Publish Hold Queue—Use this option to enable users to print (or download) jobs to
the Hold queue. Jobs in the Hold queue can be printed only by copying or moving
them to the Print queue with the job management tools.
Parallel Connection—This option appears only if you have enabled the parallel port in
Network Setup. Use this option to determine where jobs printed to the parallel port
are sent. Only the connections that you published are displayed. If only one of the
connections is published, parallel port jobs are automatically printed to that
connection.
Printing GA-1040 system pages
You can print system pages from the GA-1040 that describe its current configuration,
installed fonts, and test pages. You can use this information to troubleshoot problems
with print quality and to inform users of the current default settings. After you have
performed Setup, print a Setting List to confirm your settings.
Print Log—List of jobs that have been printed
Stored Job List—List of jobs in the Storage area
Setting List—List of current defaults
Font List—List of fonts on the GA-1040
PCL Test—Test page for PCL
PS Test—Test page for PostScript
