5
5-9 GA-1040 on a NetWare 3.x or 4.x network
Setting up a GA-1040 print queue for bindery
For NetWare 3.x and for 4.x in emulation, the NetWare print server and print queue
for GA-1040 are created and configured from NetWare Print Console (PCONSOLE),
a NetWare utility that is stored in NetWare’s PUBLIC directory.
As with NDS, first you create several NetWare entities on a Novell server, then you
select them in Network Setup on the GA-1040 Touch Panel Display.
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, make sure you perform Port Setup
and Protocol Setup on the GA-1040 Touch Panel Display, and that the settings reflect
the entities you created in the NetWare administrator utilities (see page 5-6).
NOTE: For printing to the GA-1040, connect all Windows clients to a Novell NetWare
server and permit them to connect to the server or servers on which you defined a
GA-1040 queue.
After the Novell server and the GA-1040 have been set up, client setup consists of:
• Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 95/98/Me/2000 workstations, both the IPX/SPX-compatible
protocol and the Client for NetWare Networks should be loaded from the Network
Control Panel. On Windows NT workstations, Client Service for NetWare should
be installed. Use the CSNW option in Control Panel to set printing options and
specify a preferred NetWare server.
• Setting up the GA-1040 as a PostScript or PCL printer by installing a PostScript or
PCL printer driver.
• Adding a network port and connecting the workstation to one or more NetWare
queues that have been defined for the GA-1040.
See Getting Started for details on how to connect Windows 95/98/Me/2000 and
Windows NT 4.0 workstations.
• Installing GA-1040 software.
See Getting Started for details.
