2
2-14 Setting up the GA-1040
Gateway
Enable Auto IP
Enable/Disable [Enable]
Use this option to get the gateway address automatically for printing with TCP/IP.
Gateway Address
This option appears only if you did not enable Auto IP (Gateway), or if you selected
RARP as the protocol. Set the gateway address for printing with TCP/IP.
IPX/SPX Setup
Select Frame Types
EN_802.2/EN_802.3/EN_II/EN_SNAP
You must select at least one frame type. In the list of settings, “EN” is an abbreviation
for Ethernet.
NetWare Setup
NetWare Setup allows you to enter the names of the NetWare objects that are
concerned with GA-1040 print jobs. PServer is a program in the GA-1040 that
services all the NetWare print queues assigned to the NetWare print servers you have
set up for printing to the GA-1040. When you choose NetWare Setup and enable
PServer, you can set up NDS (Novell Directory Services), Bindery Services, or both.
NDS is used with NetWare 4.x/5.x; Bindery Services are used with NetWare 3.x or
with NetWare 4.x/5.x in bindery emulation mode.
Enable Bindery Server
Enable/Disable [Disable]
Select this option if you have a NetWare network connected to the GA-1040.
Bindery Setup options
Use Bindery Setup if you have already configured one or more bindery servers (file
servers running NetWare 3.x or NetWare 4.x/5.x in bindery emulation) with a Print
Server and a Print Queue for GA-1040 jobs. Before entering bindery settings, be sure
the GA-1040 is connected to the network and the NetWare file server is running. You
need a login name, and, if access to the file server or print server is restricted, you need
a login password.
