Filter
Top Products
Configuring Dial Plan Settings
41-001190-02 Rev. 01, Rel. 1.2 4-41
Configuring AastraLink Pro 160 System and Network Parameters
Star Codes
Table 4-2 describes the AastraLink Pro 160 star codes implemented.
Table 4-2. AastraLink Pro 160 Star-Codes
Specifying Dial Plan Settings
Use the following procedure to specify dial plan settings for the AastraLink Pro
160.
Star Code Description
*5XXX Intercom to extension XXX
*60 Public Address/Overhead paging
*66 Voicemail
*76XXX Directed Call Pickup of extension XXX
*78 Do Not Disturb
**xxx Voice mailbox of extension xxx
AastraLink Web UI
Step Action
1Select Configuration->Dial Plan->Settings.
2Set the “Phone Registration” field to one of the following options:
On - (default) Allows new IP phones to register with the AastraLink Pro 160.
Off - Prevents new phones from registering with the AastraLink Pro 160.
3The “Secondary Line Prefix” is the dial plan prefix of 61, reserved for Secondary SIP phones. This
number is not directly dialable. This field is read-only. For more information about this prefix, see the
Dial Plan Table on page 4-40.
4The “First Extension” is the phone number or extension of the Adminnistrator phone on the network.
This field is read-only after using the initial Adminnistrator phone to set the greenfield system
configuration.