Reinstalling System Software Using Recovery Mode
41-001190-02 Rev. 01, Rel. 1.2 7-23
Troubleshooting Solutions
AastraLink Recovery UI
Step Action
1 Confirm that the AastraLink is in recovery mode.
The LED should alternate Green/Red/Off to indicate that the device is in recovery mode.
2 If you have not yet accessed the AastraLink Recovery Mode UI, do this step. (Otherwise, skip ahead
to Step 3.)
• If you are using DHCP, enter the IP address assigned to the device. For example:
http://10.50.20.104
• If you are using a direct, back-to-back connection between the WAN port and your PC, then enter
the following address:
http://192.168.100.100
The AastraLink Pro 160 Recovery Mode UI displays.
3 Click the “Program” tab.