Filter
Top Products
Configuring Dial Plan Settings
41-001190-02 Rev. 01, Rel. 1.2 4-43
Configuring AastraLink Pro 160 System and Network Parameters
13 After a caller parks a call, the extension of the caller who parked the call will ring again to remind
them that they put a call on park.
In the “Parked Call Timeout” field, enter the time, in seconds, that the AastraLink Pro 160 waits
before it rings back to remind the IP Phone user that he parked a call.
This parameter is a global setting for all calls that are parked (not a per-call basis).
Valid values are 1 to 3600 (1 hour). Default is 45.
Note: A value of 0 for this parameter sets the Parked Call Timeout to 45 seconds (default).
14 To change the password for the administrator’s phone, specify a new password in the “Admin
Master Password” field.
The default Administrator Master Password is 22222. This password is used for admininistrator TUI
access on SIP phones, admin login on the MBU-400 webui, and as the system default account
"admin" prior to the local system administrator first registering and configuring the system from their
SIP phone. The first 4 digits of this password are also used for 420d handset VoIP and system
settings menu.
Warning: Changing the phones administrator password may result in all phones rebooting to accept
the changed password.
Configuring Paging and Intercom Parameters
15 The “Overhead Paging Extension” field is the dial plan prefix of 6000, used to dial into an overhead
paging system. This field is read-only. For more information about this prefix, see the Dial Plan Table
on page 4-40.
16 In the “Overhead Paging PIN” field, set the overhead paging PIN that a User needs to enter in order
to enter the overhead paging system. This PIN is also used for the "All SIP phones" default Paging
Group 660.
For more information about overhead paging, see “Configuring Overhead Paging” on page 4-49 and
Chapter 3, the section, “Ring Groups and Paging Groups” on page 3-38.
AastraLink Web UI
Step Action