Aastra Telecom 160 Network Card User Manual


 
AastraLink Pro 160 Hardware and Software
41-001190-02 Rev. 01, Rel. 1.2 1-13
Getting Started
Software Requirements
The following table provides the minimum software you need to use the
AastraLink Pro 160 Web-based graphical user interface (Web UI).
Users and Privileges
The AastraLink Pro 160 supports two types of users: administrators and registered
users, as follows:
Administrators have access privileges to all AastraLink Pro 160 management
features and functions. Administrators can manage and configure their
phones, user phones, and manage and maintain the AastraLink Pro 160
device.
Registered users can manage and configure their phones only.
You can also specify a person from either group (administrator or user) as
“Operator.” The Operator has access to operator specific keys and the office voice
mailbox. The administrator is also the designated Operator, by default.
Software Minimum requirements
Web browser A Web browser capable of Javascript, specifically
Internet Explorer 6 and 7, Firefox 1.5 and 2, Opera
9, and Safari 2 and 3
DHCP server (optional)*
*If DHCP is not available, ZeroConf
is used instead. Static IP may also
be provisioned after initial
configuration is completed.
DHCP server providing one IP address (for
example, 192.168.0.1/24)
FTP, TFTP or HTTP server. Required only if recovery mode is used