Filter
Top Products
Reinstalling System Software Using Recovery Mode
41-001190-02 Rev. 01, Rel. 1.2 7-19
Troubleshooting Solutions
4 Example: Enter the name of the CF image file that you downloaded from the Aastra web site in the
“Filename” field. For example, enter:
vnx.dra
Note: For HTTP/FTP, you may prefix the file name with an explicit directory path to the location on
the server. For example, enter:
pub/temp/firmware/vnx.dra
5 In the “Upgrade Type” field, select the “CompactFlash ( badblock check)”, or “CompactFlash
Card (quick format)” option.
Available selections are:
• Restore from ABF
• CompactFlash Card (badblock check)
• CompactFlash Card (quick format)
• On-board Flash
The “CompactFlash Card (badblock check)” allows the CF card to be tested for physical errors
before the new firmware is loaded onto it, and takes approximately 30 to 45 minutes. The
“CompactFlash (quick format)” allows the new firmware to be directly loaded, but without checking
for errors, and takes approximately 8 minutes.
6 Specify the “Download Protocol” used by the local server as either TFTP, FTP, or HTTP.
7 Enter the IP address or DNS address of the TFTP, FTP, or HTTP server, as appropriate.
8 For FTP, also enter the “Username” and “Password” required for FTP authentication.
AastraLink Recovery UI
Step Action