ADTRAN 25 Network Card User Manual


 
MAINTENANCE
Restoring Translations
Note: Restoring translations from tape removes the system from
operation for about 5 minutes.
When it is necessary to restore system translations from tape, follow these
steps:
1.
2.
3.
4.
5.
6.
7.
Complete the steps under “Setting up the DTU,” using the cassette
on which translations were saved.
Press the PLAY button on the tape unit. (The unit will not run at this
time.)
Log on to the SAT, if not already logged on.
The system displays the main menu prompt:
Make one selection from menu ->.
Enter 9 for the SAVE/RESTORE selection.
The system responds with:
Action=.
Enter 3.
The system responds with:
Save/Restore: Action=3 Data=.
Enter D.
The system completes the word Data followed by the = sign.
Enter 1.
The system responds with:
Save/Restore: Action=3 Data=1
W26: YOU ARE ABOUT TO START A TAPE RESTORE
c for continue, any other key for abort
4-18