ADTRAN 25 Network Card User Manual


 
APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
POSSIBLE SOLUTION
2003: incorrect button number
Check button range for station type.
out of range for ATL set
2004:
inappropriate request Cannot administer button features
EMT can’t have button
on an EMT station or not allowed
for particular type of service.
2007: incorrect facility type
EMT station is required.
must be EMT
2009: inappropriate request Must enter PDC before you
must enter PDC first
continue.
2011:
incorrect entry Data value must be 0-1.
must be 0-1
2012:
incorrect entry
Call coverage group number out of
number out of range range.
2014:
incorrect facility type
Not touch-tone EMT for Off Prem.
must be Touch-tone EMT extension.
2015:
incorrect entry
Pickup group number out of range.
group number out of
range
2016:
incorrect PDC
Only Single Line stations and data
not allowed in hunt group stations hunt.
2017:
inappropriate request
Floating PDCs cannot be in a hunt
FPDC not allowed in hunt
group.
group
2018:
inappropriate request Cannot remove backup station until
SLAC has Position Busy
POS-BUSY button is removed
Button
SLAC. Removing POS-BUSY
button from SLAC removes backup
station.
2019:
inappropriate request Only single line stations and data
facility not allowed in hunt
stations hunt.
group
2020:
incorrect entry
Toll restriction class number out of
number out of range range.
2024:
inappropriate request Cannot make changes to the Alarm
can’t update button
button.
F-10