ADTRAN 25 Network Card User Manual


 
APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
POSSIBLE SOLUTION
1006:
incorrect entry Cabinet-Slot-Port (CSSPP) PP must
port-on-board number out
be a number from 1 to 8 (varies on
of range
different circuit packs)
1007: incorrect action number
Must administer ACTION = 1 before
can ‘t exceed 1 with
proceeding.
unequipped facility
1008: incorrect entry
The entered port is greater than
port-on-board number out
maximum port number on the
of range
associated board.
1009: incorrect entry
Number must be 5 digits. Nonspecial
number must be 5 digits
port does not have 5 digits.
1010:
incorrect facility type
The facility type is not valid for this
does not exist or used
system.
improperly
1011:
inappropriate request
Go to MENU 5 (FPDC)
FPDC already exists
ACTION = 1
Hit c to continue to list FPDCs.
FPDC could be not assigned.
1012:
incorrect PDC
The entered number is valid but is not
does not exist or used
a station or data port.
improperly
1013:
inappropriate request
Port type has to be administered
slot not equipped
before proceeding.
1014: inappropriate request
Must be a station supported by
must be station
System 25. See Voice Terminal Type
Codes in Administration Manual. Can
only move port associated with
station.
1015: inappropriate request
Can not move the port associated
can’t move CAP port
with the CAP.
1016:
incorrect action number
Item numbers must be 0-2 at this
must be 0-2
point.
F-2