Filter
Top Products
APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
POSSIBLE SOLUTION
7054: out of space System speed digit pool is full.
no more room in digit
pool
7200: entry out of range
Invalid TARGET value specification.
RS232 value out of range
Target value should be 1-4. See:
MENU = 10 (RS232)
7202: inappropriate request ACTION = 0 under MENU = 10
improper procedure (RS232) is invalid.
7203: incorrect entry MENU = 10 (RS232) ACTION = 1
logical channel out of
DATA = must be 1-4 (anything else
range
is invalid.)
7204: incorrect entry MENU = 10 (RS232) ACTION = 2
return delay out of range DATA = must be 0-2
7206:
incorrect entry MENU = 10 (RS232) ACTION = 3
incorrect baud rate
DATA = baud rates must be 300,
1200, 4800, 9600.
Legal baud rates for Administration
and Maintenance are 1200, 4800,
9600. Legal baud rate for SMDR is
1200. Legal baud rate for Tape is
1200.
7300: incorrect action number
Under Save/Restore, MENU = 9
data must be 1,2,3,10 or
Action values must be 1,2,3,10, or
20 20.
7302: inappropriate request
Cannot administer system during
can’t update translation - tape backup.
tape lockout
7400: incorrect entry MENU = 10 (RS-232) TARGET = 3
data must be 1 or 4 only
ACTION = 1 DATA = 2 or 3
SMDR output can come out of the
NOTE: Above is tape port.
statement is wrong.
data must be 2 or 3 only
F-25