ADTRAN 25 Network Card User Manual


 
APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION
POSSIBLE SOLUTION
7005:
incorrect entry
Entered data not valid for restricting
incorrect data to restrict
PBX calls.
PBX calls
7006:
incorrect entry
Number of seconds before a
data can’t exceed 120
camped on call returns to the
attendant console [1-1 20].
7007:
inappropriate request
To install CAP: Go to MENU 1 (Port)
must install CAP first
ACTION = 1, DATA = terminal type
(309, or 310)
ACTION = 2, DATA = PDC
7008:
inappropriate request
Cannot set bit for FPDCs to go to
must install CAP first
the CAP because neither the
primary nor secondary CAP is
installed.
7010: out of space
Number plan is full.
no more room to change
7011: out of space
ID (Name) directory is full.
no more room to add
7012:
inappropriate request
Check to see if PDC already exists.
PDC already exists
Go to MENU 8-Search
ACTION = 1 DATA = 11
Hit c to continue to search for
assigned PDCs
7016:
incorrect entry
Data must be O-1. See:
data can’t exceed 1
MENU = 4 (System)
ACTION = 5
for more information.
7017:
incorrect entry
Data not valid for number of DID
must be 0 - 4
digits used by PDCs.
7019:
PDC out of range
System 25 dial codes may have
must be 1-9999
1,2,3 or 4 digits (1-9999).
7020:
entry out of range
Data is greater than 2 digits.
data can’t exceed 2 digits
7021:
incorrect entry
System Maximum Account Code
account code can’t
digits (O-1 5). Default = 15
exceed 15 digits
F-21