ADTRAN 25 Network Card User Manual


 
APPENDIX E: Administration Codes and Data
Table E-K. PORT/PDC Administration, Data Terminals (Menu=12)
ACTION
DESCRIPTlON
DATA
0
Physical port number
CSSPP
1
Enter data type code
[See Table E-K]
2
Enter DDC
[1 -9999; 600-704]
3
Restrict dial access to CO trunk pool†
[1=Y/0=N]
4
Restrict dial access to all other trunk
[1=Y/0=N]
pools†
12
DDC of station to hunt to next
[PDC; 0 for none]
13
Restrict this station
from making
[1=Y/0=N]
outward calls
14
Assign toll restriction class†
[1-4; 0 for none]
15
Assign ARS Facility Restriction Level†
[0-3; 3]
21
Enter associated voice/data endpoint
[PDC/DDC or
station*
0 for none]
22
Restrict Third-Party Call Set-Up so user
[1=Y/0=N]
can
only establish calls for the
associated station (see Action 21)†
61
Auto-adjust baud
rate on
call
[1=Y/0=N]
origination.*
(The default is 0 for
STARLAN CP.)
62
Allow terminal to operate at low bits
[1=Y/0=N]
per second (bps)*
63
Allow terminal to operate at a baud rate
[1=Y/0=N]
of 300 bps*
64
Allow terminal to operate at a baud rate
[1=Y/0=N]
of 1200 bps*
65
Allow terminal to operate at a baud rate
[1=Y/0=N]
of 2400 bps*
66
Allow terminal to operate at a baud rate
[1=Y/0=N]
of 4800 bps*
I
† If data port type code 1802 (STARLAN CP), default values are relevant for the first installed port
on the board. Values assigned to this action item on
any of the four ports will be copied to all
four ports on this board.
‡ Not administrable for STARLAN CP.
Read-only for STARLAN CP.
E-23