ADTRAN 25 Network Card User Manual


 
APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTlON POSSIBLE SOLUTION
1017: inappropriate request
Cap already installed
system already has Direct
CAP
ACTION =
1 (Cap)
Go to MENU 8 (Searches)
ACTION = 1 DATA = 18
ACTION = 2 DATA = 309 or 310
ACTION = 3 DATA = 0
1018: inappropriate request Must remove secondary CAP before
must remove secondary
attempting to remove the first CAP.
CAP first
1019: incorrect action number
Check if the ACTION value taken is
does not exist or used
legal.
improperly
1020: inappropriate request Trying to administer features to a
primary or secondary
secondary CAP that does not exist.
CAP does not exist
1021: at installed max
At the maximum number of stations
-200 stations
allowed by the system.
1022:
at installed max
At the maximum number of trunks
-104 trunk allowed by the system.
1023:
button function code
Button station out of range for
out of range
terminal type code. Check station
does not exist or used
for button range. (invalid button
improperly
function code)
1024: at installed max
At system maximum of 300 FPDCs.
-300 FPDCs
1025:
at installed max -199
At system maximum of 199 EMT
EMT sets sets.
1026:
at installation max
Maximum of 111 ATL sets, 2 of
-96 ATL set
which have to be CAPS
1027:
at installed max
At system maximum of 104
-104 trunk ground-start trunks.
1028:
at installed max
At system maximum of 104 loop-
-104 trunk
start trunks.
1029: at installed max
At system maximum of 104 DID
-104 trunk
trunks.
1030:
at installed max
At system maximum of 32 TIE
-32 Tie trunk
trunks.
F-3