Filter
Top Products
Getting Started 17Chapter 1
CAUTION WIRING TERMINAL MODULE: When wiring to the terminal
connectors on a terminal module, do not exceed a 5mm strip
back of insulation to prevent the possibility of shorting to other
wiring on adjacent terminals.
CAUTION STATIC-SENSITIVE DEVICE. Use anti-static procedures when
removing, configuring, cleaning and installing a module. Since
the switch module is susceptible to static discharges, do not
install the module without its metal
CAUTION CLEANING THE FRONT PANEL. Disconnect power from the
mainframe and remove the module to be cleaned. Clean the
front panel with a soft cloth dampened either in clean water
or in water containing a mild detergent. Do not use abrasive
cleaners. Do not use an excessively wet cloth or allow
excessive water to migrate inside the module. Let the panel
dry thoroughly before reinstalling the module.