Filter
Top Products
E1442A Command Reference 65Chapter 3
OUTPut:TTLTrgn[:STATe]
OUTPut:TTLTrgn[:STATe] <mode> enables (ON or 1) or disables (OFF or
0) the TTL trigger bus pulse on the VXI bus line specified by n. There are
eight TTL trigger lines on the VXI bus (n = 0 through 7).
Parameters
Comments
When OUTPut:TTLTrgn[:STATe] ON is set, a trigger pulse occurs each
time a channel is closed during a scan.
OUTPut:TTLTrgn[:STATe]?
OUTPut:TTLTrgn[:STATe]? queries the state of the TTL trigger bus line
specified by n. A 1 is returned if the line is enabled. A 0 is returned if the
line is disabled. Valid values for n are 0 through 7.
Name Type Range of Values Default Value
n numeric 0 through 7 N/A
<mode>boolean
0 | 1 | ON | OFF
OFF | 0