Agilent Technologies E1442-90003 Switch User Manual


 
E1442A Command Reference 63Chapter 3
OUTPut
The OUTPut subsystem enables one trigger line of the E1406 Command
Module. It also can disable the active line.
Subsystem Syntax OUTPut
:ECLTrgn
[:STATe] <mode>
[:STATe]?
[:EXTernal]
[:STATe] <mode>
[:STATe]?
:TTLTrgn
[:STATe] <mode>
[:STATe]?
OUTPut:ECLTrgn[:STATe]
OUTPut:ECLTrgn[:STATe] <mode> enables (ON or 1) or disables (OFF
or 0) the ECL trigger bus pulse on the VXI bus line specified by n. There
are two ECL trigger lines on the VXI bus allowing valid values for n to be
0 and 1.
Parameters
Comments
When OUTPut:ECLTrgn[:STATe] ON is set, a trigger pulse occurs each
time a channel is closed during a scan.
OUTPut:ECLTrgn[:STATe]?
OUTPut:ECLTrgn[:STATe]? queries the state of the ECL trigger bus line
specified by n. A is returned if the line is enabled. A is returned if it is
disabled. Valid values for n are and .
Name Type Range of Values Default Value
n numeric 0 or 1 N/A
<mode>boolean
0 | 1 | ON | OFF
OFF | 0