Filter
Top Products
Figure 7- 7.Authentication Server Group Settings window
This screen displays the Authentication Server Groups on the Switch.The Switch has four built-in Authentication Server Groups that cannot be removed but can
be modified.To modify a particular group,click its hyperlinked
Group Name,which will then display the following window.
Figure 7- 8.Add a Server Host to Server Group (XTACACS) window.
To add an Authentication Server Host to the list,enter its IP address in the IP Address field,choose the protocol associated with the IP address of the
Authentication Server Host and click
ADD to Group to add this Authentication Server Host to the group.
To add a server group other than the ones listed,click the add button,revealing the following window to configure.
Figur
e 7- 9.
Authentication Server Group Table Add Settings window
Enter a group name of up to 15 characters into the
Group Name field and click Apply.The entry should appear in the Authentication Server Group
Settings
window,as shown in Figure 7-7 (trinity).
Note: The user must configure Authentication Server Hosts using the Authentication Server Hosts window before adding hosts to the list.
Authentication Ser
ver Hosts must be configured for their specific protocol on a remote centralized server before this function can work properly.
Note: The built-in ser
ver groups can only have server hosts running the same TACACS or RADIUS daemon.TACACS/XTACACS/TACACS+
protocols are separate entities and are not compatible with each other.
137
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch