Filter
Top Products
Note: To configure 802.1x features for the AT-9724TS,go to the Configuration folder and select Port Access Entity. Configuration
and other information concerning 802.1x may be found in Section 6 of this manual under Port Access Entity.
9-12 Lay
er 3 Feature
This folder in the Monitoring section will display information concerning settings configured in Layer 3 IP Networking of the Configuration folder.
These settings and parameters have been previously described in
Chapter 6 of this manual,under Layer 3 IP Networking.
Browse IP Address
The Browse IP Address window may be found in the Monitoring menu in the Layer 3 Feature folder.The Browse IP Address window is a read
only screen where the user may view IP addresses discovered by the Switch.To search a specific IP address,enter it into the field labelled
IP Address at the top
of the screen and click
Find to begin your search.
Figure 9- 29.Browse IP Address Table
178
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch