Filter
Top Products
9. After you have correctly set up the terminal,plug the power cable into the power receptacle on the back of the Switch.The boot sequence appears in
the terminal.
10. After the boot sequence completes,the console login screen displays.
11. If you have not logged into the command line interface (CLI) program,press the Enter key at the User name and password prompts.There is one
default user name and password for the Switch.User names and passwords must first be created by the administrator.If you have previously set up
user accounts,log in and continue to configure the Switch.
12. Enter the commands to complete your desired tasks.Many commands require administrator-level access privileges.Read the next section for more
information on setting up user accounts.See the AT-9724TS Command Line Interface Reference Manual on the documentation CD for a list of all
commands and additional information on using the CLI.
13. When you have completed your tasks,exit the session with the logout command or close the emulator program.
Make sure the terminal or PC you are using to make this connection is configured to match these settings.
If you are having problems making this connection on a PC,make sure the emulation is set to VT-100.You will be able to set the emulation by clicking on the
File
menu in you HyperTerminal window,clicking on Properties in the drop-down menu,and then clicking the Settings tab.This is where you will find the
Emulation options.If you still do not see anything,try rebooting the Switch by disconnecting its power supply.
Once connected to the console, the screen below will appear on your console screen.This is where the user will enter commands to perform all the available
management functions.The Switch will prompt the user to enter a user name and a password.Upon the initial connection, there is no user name or password
and therefore just press enter twice to access the command line interface.
4-6 First Time Connecting to the Switch
The Switch supports user-based security that can allow you to prevent unauthorized users from accessing the Switch or changing its settings.This section tells
how to log onto the Switch.
Note: The passwords used to access the Switch are case-sensitive;therefore, "S" is not the same as "s."
When y
ou first connect to the Switch,you will be presented with the first login screen (shown below).
Note: Press Ctrl+R to refresh the screen.This command can be used at any time to force the console program in the Switch to refresh the
console screen.
Figur
e 4- 1.
Initial scr
een,first time connecting to the Switch
The initial username and password are:
Username: manager
Password: friend
You will be given access to the command prompt AT-9724TS:4# shown below.
21
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch