Filter
Top Products
Parameter Description
Time Interval Select the desired setting between 1s and 60s,where "s" stands for seconds.The default value is one second.
Record Number Select number of times the Switch will be polled between 20 and 200.The default value is 200.
Bytes Counts the number of bytes received on the port.
Packets Counts the number of packets received on the port.
Unicast Counts the total number of good packets that were received by a unicast address.
Multicast Counts the total number of good packets that were received by a multicast address.
Broadcast Counts the total number of good packets that were received by a broadcast address.
Show/Hide Check whether to display Bytes and Packets.
Clea
r
Clicking this button clears all statistics counters on this windo
w.
Vie
w Table Clicking this button instructs the Switch to display a table rather than a line graph.
View Line Chart Clicking this button instructs the Switch to display a line graph rather than a table.
UMB Cast (RX)
Click the UMB Cast (RX) link in the Packets folder of the Monitoring menu to view the following graph of UMB cast packets received on the Switch.To
select a port to view these statistics for,first select the Switch in the switch stack by using the Unit pull-down menu and then select the port by using the Port
pull down menu.The user may also use the real-time graphic of the Switch and/or switch stack at the top of the web page by simply clicking on a port.
Figure 9- 5.Rx Packets Analysis window (line graph for Unicast,Multicast, and Broadcast Packets)
T
o vie
w the
UMB Cast T
a
ble
,
click the
V
ie
w Table
link,
which will sho
w the following table:
159
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch