Filter
Top Products
16
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
2-5 Mounting the Switch in a Standard 19" Rack
Figure 2- 2.Installing Switch in a rack
2-5 Power On
Plug one end of the AC power cord into the power connector of the Switch and the other end into the local power source outlet.
After the Switch is powered on,the LED indicators will momentarily blink.This blinking of the LED indicators represents a reset of the system.
2-6 Power Failure
As a precaution,in the event of a power failure,unplug the Switch.When power is resumed,plug the Switch back in.
2-7 External Redundant Power System
The Switch supports an external redundant power system.
Figure 2- 3.The AT-9724TS with the AT-RPS7000 Redundant External Power Supply