Filter
Top Products
Figure 7- 16.Enable Method List – Edit window
Figure 7- 17.Enable Method List – Add window
To define an Enable Login Method List,set the following parameters and click
Apply:
Parameter Description
Method List Na
me
Enter a method list name defined b
y the user of up to 15 characters.
Method 1, 2, 3, 4 The user may add one, or a combination of up to four (4) of the following authentication methods to this
method list:
local_enable –
Ad
ding this parameter will r
equir
e the user to be authenticated using the local enable password
database on the Switch.The local enable password must be set by the user in the next section entitled Local
Enable Pass
w
or
d.
none – Adding this parameter will require no authentication to access the Switch.
r
adius
–
Ad
ding this parameter will r
equir
e the user to be authenticated using the RADIUS pr
otocol fr
om a
remote RADIUS server.
tacacs –
Ad
ding this parameter will r
equire the user to be authenticated using the TACACS protocol from a
remote TACACS server.
xtacacs –
Adding this parameter will require the user to be authenticated using the XTACACS protocol from a
remote XTACACS server.
tacacs+ – Adding this parameter will require the user to be authenticated using the TACACS protocol from a
remote TACACS server.
server_group – Adding a previously configured server group will require the user to be authenticated using a
user
-defined ser
v
er gr
oup pr
eviously configured on the Switch.
Local Enable Password
This window will configure the locally enabled password for the Ena
ble Admin
command.
When a user chooses the "local_enable" method to promote user
level privileges to administrator privileges,he or she will be prompted to enter the password configured here that is locally set on the Switch.
To view the following window,click
Security Management > Access Authentication Control > Local Enable Password:
141
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch